| OCR Text |
Show Technology Manufacturing Engineering Technology MANUFACTURING ENGINEERING TECHNOLOGY PROGRAM This curriculum is designed to give the student fundamental comprehension of, and basic skill in, the planning and selection of the methods of manufacturing, the design of tooling and equipment for manufacturing, the selection and treatment of materials used in manufacturing, and in the use of computers in manufacturing. In application, development of process sheets, equipment specification and installation, tool design, value analysis, production and quality control, and a coordination with the design and production functions. A Manufacturing Engineering Technology degree with emphasis in the Industrial Engineering area is also offered by the department. The objective is to train students to perform successfully the industrial engineering functions such as methods analysis, work simplification, time standards development, plant layout, materials handling equipment design and selection, cost analysis, and cost reduction. Program: Manufacturing Engineering Technology Bachelor Degree I. General Requirements: A. Specific course requirements of the college (see index). B. Bachelor Degree General Education requirements (see index). C. A minor is not required. D. Manufacturing Engineering Technology majors must have a C or better in major courses. E. An overall G. P. A. of 2.00 or C. F. A total of 202 hours are required. G. Sixty of the 202 hours must be upper division (courses numbered 300 and above). II. Specific Requirements: A. Engineering Technology Core Requirements (91 credit hours). B. Manufacturing Engineering Technology courses required (26 credit hours): Manufacturing Engineering Technology 123 (3), 132 (3), 231 (2), 232 ( 2), 244 (3), 301 (3), 302 ( 3), 331 (3), 452 ( 2), 499 ( 2). C. Technical courses required (35 credit hours): Machine Tool 100 (1), 101 (2), 102 (1), 103 (2), 202 (1), 203 (2); Engineering Graphics 245 (3); Welding 360 (3); Industrial Engineering Technology 142 (3), 350 (4), 351 (3), 401 (3); Engineering Technology 314 (3), 334 (3). D. Support course required (9 credit hours). Economics 101 (5), Data Processing 101 (4). E Electives (select 6 credit hours): Manufacturing Engineering Technology 246 (3) 342 (3), 360 (3), 458 (3); Engineering Technology 472 (3); Automotive Engineering Technology 420. MANUFACTURING ENGINEERING TECHNOLOGY COURSES 123. Machine Tool Performance (3) Determining cutting tool forces and efficiency through proper selection and application of tool material, tool geometry and coolants. Prerequisites: Machine Tool 103, Related Technical Education 115. One lecture and two 3-hour labs. 132. Inspection and Testing (3) Basic principles and applications of inspection and testing methods and equipment to determine dimensional, physical and chemical properties of materials and fabricated parts. Two lectures and one three-hour lab. S 189. Cooperative Work Experience (1-9) Open to all first year students in Manufactur- ing Engineering Technology. The course objectives for each student will be developed between the student, the department and a suitable employer providing the opportunity for on-the-job experience. Evaluation of course participants will be shared between the employer, student and the department. A W S Su 231. Metal Forming Processes (2) Metal forming process selection, production planning, tooling and quality control. One lecture and one lab. A 232. Casting Processes (2) Casting Process Selection, production planning, tool- 284 Technology industrial Engineering Technology ing and quality control. Casting methods and applications. One lecture, one lab. W 244. Numerical Control in Manufacturing (3) N/C advantages, costs, applications, manual programming. Prerequisite: Machining experience, Related Technical Education 115. Two lectures, one lab. A 246. Numerical Control Programming (3) Computer Programming for numerically controlled machines using APT language. Prerequisite; Manufacturing Engineering Technology 244 and RTE 117. Three lectures. W 247. Numerical Control Applications (3) Programming, running and debugging N/C programs on N/L machines. Prerequisites: MFENT 244. One lecture, two three-hour labs. S 289. Cooperative Work Experience. (1-9) Open to all second year students in Manufacturing Engineering Technology. A continuation of Manufacturing Engineering Technology 189. A W S Su 292. Short Courses, Workshops, Institutes and Special Programs (1-6) In order to provide flexibility and to meet many different needs, a number of specific offerings are possible using this catalog number. When the number is used it will be accompanied by a brief and specific descriptive title. The specific title with the credit authorized for the particular offering will appear on the student transcript. A W S Su 301, 302. Tool Design I, II (3-3) Design of special tools, gauges, jigs, fixtures, molds, dies and their application in the production of manufacturers parts. Prerequisites: Manufacturing Engineering Technology 123; Engineering Technology 332, Engineering Graphics 245 or permission of instructor. One lecture and two 3-hour labs a week. A W 331. Heat Treating and Finishing Processes (3) Heat treating and finishing process-selection, production planning, tooling and quality control. Two lectures and one 3-hour lab. A 389. Cooperative Work Experience (1-9) Open to all third year students in Manufacturing Engineering Technology. A continuation of Manufacturing Engineering Technology. A W S Su 452. Process Analysis (2) The development of a coordinated manufacturing plan that includes the selection of tooling and equipment and the preparation of processing documents. Prerequisite: Manufacturing Engineering Technology 302. Two lectures. 457. Production Management (4) The fundamental areas of methods, work measurement, production planning, inventory control, plant layout, quality control, and production costs are examined for relationship to each other for practical applications. Prerequisites: Industrial Engineering Technology 353. Four lectures. S 489. Cooperative Work Experience (1-9) Open to all fourth year students in Manufacturing Engineering Technology. A continuation of Manufacturing Engineering Technology 189. A W S Su 492. Short Courses, Workshops, Institutes and Special Programs (1-6) In order to provide flexibility and to meet many different needs, a number of specific offerings are possible using this catalog number. When the number is used it will be accompanied by a brief and specific descriptive title. The specific title with the credit authorized for the particular offering will appear on the student transcript. A W S Su 499. Seminar in Manufacturing (2) Directed studies in the application of new materials and new processing concepts to manufacturing and study of current production problems. Prerequisite: Consent of instructor. Conferences as needed. S INDUSTRIAL ENGINEERING TECHNOLOGY INDUSTRIAL ENGINEERING TECHNOLOGY COURSES 142. Work Analysis (3) Motion principles, methods of charting, design of manual work station and the process of writing operation sheets. One lecture, two laboratories. w 342. Methods Engineering (3) Fundamental principles, procedures and techniques used in the design and measurement of work methods. Prerequisite: Related Technical Education 117. Three lectures. W 350. Statistical Quality Control (3) Statistical techniques used in industrial process control charting and acceptance sampling. Prerequisite: Math 241. Three lectures. S 351. Production and Inventory Control (3) Forecasting: control of materials: the planning, scheduling, routing, dispatching functions of production control. Prerequisite: Related Technical Education 117. Three lectures. S 353. Production Cost Estimating (2) The development of factory costs: make or buy, break-even and total annual cost analysis. Two lectures. A 360. Reliability (3) Fundamental concepts of reliability statistical solutions to practical problems. Prerequisite: Related Technical Education 118. Three lectures. W 401. Plant Layout and Materials Handling. (3) Arrangement and layout of equipment and processes to maximize production. Selection and application of materials, handling eguipment and methods. Prerequisites: Industrial Engineering Technology 142. Related Technical Education 117 Three lectures A 457. Production Management (4) The fundamental areas of methods, work measurement, production planning, inventory control, plant layout, quality control and production costs are examined for relationship to each other for practical applications. Prerequisites: Industrial Engineering Technology 353. Four lectures. S 458. Value Engineering Analysis (3) The reduction or avoidance of costs through value analysis techniques. Prerequisite: Manufacturing Engineering Technology 452. Three lectures. A 285 |
