Technology Engineering Graphics Electro Mechanical draftsmen make sketches and drawings of combinations o electrical and mechanical parts, such as chassis, relay transformers, equipment frames electrical packages, motors and instrumentation. Those utilizing this experience include Engineering consulting firms, electronic firms, manufacturers, development laboratorie and Government organizations. Program: Engineering GraphicsAssociate of Applied Science I. General Requirements: A. A minimum of 96 credit hours. B. Courses in major field, requires a minimum of 67 credit hours. C. English 101A (1), 101B (1), 101C (1) and 103B (3) or Communication 232 (3). D. At least 20 hours from the general education courses listed in the catalog, including at least one course in each of the five areas, Humanities, Life Science, Physical Science, Social Science, and Other. E. An overall G. P. A. of 2.00 or C. II. Specific Requirements: A. Architectural/Structural Drafting 1. Engineering Technology courses required: Engineering Technology 142 (4) and 244 (3). 2. Engineering Graphics courses required: Engineering Graphics 143 (4), 148 (3), 149 (3), 150 (2), 204 (4), 206 (3), 255 (3), 260 (3), 264 (3), 266 (3). 3. Support courses required: Art 105 (3); Related Technical Education 114 (5), 115 (5), 117 (5) or Mathematics 105 (5), 106 (5), 107 (5); Carpentry and Milling 210 (5) and 240 (3). 4. Electives: 4-7 credits selected with consent of adviser. B. Civil Drafting 1. Engineering Technology Courses required: Engineering Technology 142 (4) and 244 (3). 2. Engineering Graphics courses required: Engineering Graphics 143 (4), 150 (2), 204 (4), 206 (4), 255 (3), 264 (3), 266 (3). 3. Support courses required: Art 105 (3); Photography 101 (5); Related Technical Education 114 (5), 115 (5), 117 (5), or Mathematics 105 (5), 106 (5), 107 (5); Geography PS 101 (3), 340 (3), 341 (3). 4. Electives: 2-4 credits selected with consent of adviser. C. Electro Mechanical Drafting 1. Engineering Technology courses required: Engineering Technology 142 (4), 236 (5), 244 (3). 2. Engineering Graphics Courses required: Engineering Graphics 143 (4), 215 (3), 235 (3), 245 (3), 255 (3). 3. Support courses required: Related Technical Education 114 (5), 115 (5), 117 (5) or Mathematics 105 (5), 106 (5), 107 (5); Electronics Engineering Technology 130 (4), 150 (5); Data Processing 260 (3), Manufacturing Engineering Technology 132 (3), Industrial Engineering Technology 142 (3). 4. Electives: 8-10 credits selected with consent of advisor. D. Mechanical/Tool Drafting 1. Engineering Technology courses required: Engineering Technology 142 (4), 236 (5), 244 (3). 2. Engineering Graphics courses required: Engineering Graphics 143 (3), 245 (3), 255 (3), 266 (3). 3. Manufacturing Engineering Technology courses required: Manufacturing Engineering Technology 132 (3), 231 (2), 232 (2), 244 (3), 246 (3), MET 301 (3). 274 Technology Machine Tool 4. Support courses required: Related Technical Education 114 (5) 115 (5), 117 (5), or Mathematics 105 (5), 106 (5), 107 (5); Machine Tool 100 (1), 101 (2), 102 (1), 103 (2); Data Processing 260 (3); Industrial Engineering Technology 142 (3). 5. Electives: 2-4 credits selected with consent of adviser. ENGINEERING GRAPHICS COURSES 115, 117. Basic Drafting I, II (3-3) A basic series in drafting for Trade-Technical majors. Not recommended for Engineering Graphic majors or those planning to take additional graphic courses. Includes the use and care of instruments, lettering, geometrical construction, sketching, shape and size description, dimensioning, multiview drawings, sectional views, auxiliary views, revolutions, threads, fasteners, working drawings, pictorial drawings charts and graphs. One 1-hour lecture and two 3-hour labs a week. AWS 143. Technical Drawing II (4) Continuation of Engineering Technology 142. Fasteners, welding symbols, fabrication, assembly, installation drawings, checking of drawings, intersections, developments, pictorials, use of standards, handbooks, catalogs, special application projects and computer drafting. Prerequisite: Engineering Technology 142. One hour lecture and three 3-hour labs a week. A 148. Architectural Drawing (Elementary) (3) The techniques of detailing stairs, windows, fireplaces, masonry and frame walls, cabinets and miscellaneous architectural elements. Also includes a study of materials, symbols and plot plans. Prerequisite: Engineering Technology 142 or equivalent. Individual instruction. One hour lecture and two 3-hour labs a week. AWS 149. Architectural Drawing (Intermediate) (3) The study of room planning and the completion of a set of working drawings on a residence and site location. Prerequisite: Engineering Graphics 148. One hour lecture and two 3-hour labs a week. A 150. Blueprint Reading and Estimating (Elementary) (2) Figuring qualities of building materials, their cost, cost of handling, labor required for commercial and industrial buildings. Individual instruction. A 204. Surveying (4) Theory and practice of basic surveying. Prerequisites: Related Technical Education 115 (may be taken concurrently). Two 1-hour lectures and two 3-hour labs a week. A S 206. Advanced Surveying (3) Applied problems in precise surveying methods. Prerequisite: Engineering Graphics 204. One hour lecture and two 3-hour labs a week. S 215. Electronic Drafting (3) Review of basic drafting techniques, instruction and application of electrical techniques, instruction and application of electrical and electronic symbols, block diagrams, schematic elements and diagrams, connection diagrams and wiring line diagrams. Individual instruction. One hour lecture and two 3-hour labs a week 235. Electro-Mechanical Drawing (4) Applications for electronic drafting in printed circuit design, fabrication, and packaging, techniques used in the design of electro-mechanical equipment. Prerequisite: Engineering Graphics 215. Individual instruction. One hour lecture and three 3-hour labs a week. 245. Dimensioning and Tolerancing for Interchangeable Parts (3) Review of dimensioning and tolerance as they apply to interchangeable and selective assembly parts. Prerequisites: Engineering Technology 142. 236, Three lectures. S 255. Computer Graphics (3) A course in practical applications and use of computer aided drafting/design systems. Special emphasis is given to hands on experience. Prerequisites: Related Technical Education 114 or Math 107. Engineering Technology 142 or consent of instructor. 260. Architectural Drawing (3) Continuation of Engineering Graphics 149 with emphasis on light commercial detailing. Plans are developed on a small commercial building. Prerequisite: Engineering Graphics 149. A 264. Estimating and Building Contracts (3) Figuring material and labor costs, profit and overhead as applied to construction. Prerequisite: Engineering Graphics 150 or equivalent. One hour lecture and two 3-hour labs a week. 266. Structural Detailing (3) General course covering AISC standard detailing, welding symbols, connections, details, shapes and plates. Design of bolted and welded connections, beams, columns and framing. Prerequisites: Related Technical Education 114. 115. Two 1-hour lectures and two 3-hour labs a week S A W Su 292. Short Courses, Workshops. Institutes and Special Programs (1-6) In order to provide flexibility and to meet many different needs, a number of specific offerings are possible using this catalog number. When the number is used it will be accompanied by a brief and specific descriptive title The specific title with the credit authorized for the particular offering will appear on the student transcript. MACHINE TOOL PROGRAM This curriculum is offered to students who are seeking, as an occupational objective, jobs in the metal machining and related occupations. It is the intent of the program to prepare students for entrance into the specific occupations of machine tool operator, machinist, maintenance machinist, machine set-up operator, tool and die builder, and numerical control machine tool operator and programmer. At the completion of the first year program, the student will receive a Certificate Machine Tool Operator General. Students completing the second year of the program will be given a Diploma Machine Tool Technology. Institutional Certificates will be issued on attainment of previously agreed-upon skill levels. 275