Electronic Engineering Technology 233. Electronic Troubleshooting (1) S Introduction to electronic troubleshooting. Equipment specifications, factors affecting equipment reliability, troubleshooting components and systems, maintenance principles, and instruments used for troubleshooting. One one-hour lecture per week. Must be taken concurrently with EET 233L. Prerequisites: EET 212 and 221. 233L. Electronic Troubleshooting Lab (3) S Laboratory class to support EET 233. Troubleshooting systems. Three two-hour labs per week. Must be taken concurrently with EET 233. 289. Cooperative Work Experience (1-4) A, W, S The student will receive credit for approved electronics industrial experience. Ten hours of work each week is equivalent to 1 credit hour. Prerequisites: EET 121, and 122. 292. Short Courses, Workshops, and Institutes (1-4) A, W, S Consult the quarterly class schedule for the current offering under this number. The specific title and credit authorized will appear on the student transcript. 311. Advanced Circuit Analysis (4) A The analysis of electric circuits using differential equations, LaPlace transforms, and Fourier Series. Four one-hour lectures per week. Prerequisites: EET 121 and Math 212. Corequisite: EET 311L. 311L. Advanced Circuit Analysis Lab (1) A Laboratory class to support EET 311. Design, construct, analyze and simulate transients in advanced analog circuits. One two-hour lab per week. Corequisite: EET 311. 321. Advanced Analog Circuits (3) W Design and analysis of advanced analog circuits. Phase-locked loops, active filters, amplifiers and advanced devices utilizing poles and zeroes, frequency response, transients, and computer simulation Three one-hour lectures per week. Prerequisite: EET 311. Corequisite: EET321L. 321L. Advanced Analog Circuits Lab (1) W Laboratory class to support EET 321. Design, construct, and computer simulate the performance of active circuits. One two- hour lab per week. Corequisite: EET 321. 322. Reliability and Maintainability (2) W Introduction to electronic component and system reliability. Life cycle costing, maintainability, component and system life predictions, environmental stress screening, military standards, and statistics. Two one-hour lectures per week. Prerequisites: EET 231,232, and Math 107. Corequisite: EET 322L. 322L. Reliability and Maintainability Lab (1) W Laboratory class to support EET 322. Stress electronic components to failure and environmentally stress screen systems. One two-hour lab per week. Corequisite: EET 322. 331. Data Acquisition and Analysis (3) S Introduction to data acquisition and analysis. Sampling theorems, Z transforms, fast Fourier transforms, digital filters, and computer simulation. Three one-hour lectures per week. Prerequisite; EET 321. Corequisite: EET331L. 331L. Data Acquisition and Analysis Lab (1) S Laboratory class to support EET 331. Data processing and computer simulation of real-time signals. One two-hour lab per week. Corequisite: EET 331. 411. Senior Projects I (1) A An engineering problem will be selected for a team solution. Team and project selection, contract approval, preliminary design, and written report. One one-hour lecture per week. Prerequisites: EET 233, 322, and 331. Corequisite: EET411L. 411L. Senior Projects I Lab (2) A Laboratory class to support EET 411. Preliminary design completed and drawn, data sheets located, and parts ordered. Two two-hour labs per week. Corequisite: EET 411. 412. Digital Communications (3) A Introduction to digital communications standards, techniques, and equipment. Parallel and serial data transfer, modems, protocols, networking, digital transmission lines, and digital analyzers. Three one-hour lectures per week. Prerequisite: EET 232 and 321. Corequisite: EET412L. 412L. Digital Communications Lab (1) A Laboratory class to support EET 412. Construct and analyze digital communications circuits. One two-hour lab per week. Corequisite: EET 412. 421. Senior Projects II (1) W A continuation of the solution to the engineering problem. Team building, design and research, packaging, documentation, and presentation skills. One one-hour meeting with each team per week. Prerequisites: EET 411. Corequisite: EET421L. 421L. Senior Projects II Lab (2) W Laboratory class to support EET 421. Project functioning to eighty percent, presentation to the faculty, and a written report. Two two- hour labs per week. Corequisite: EET 421. 422. Automatic Control (3) W Introduction to control systems. Mathematical models, components, transients, LaPlace transforms, frequency response analysis, control system design and testing. Three one-hour lectures per week. Prerequisite: EET 331. Corequisite: EET 422L. 422L. Automatic Control Lab (1) W Laboratory class to support EET 422. Design, construct and analyze automatic control circuits. One two-hour lab per week. Corequisite: EET 422. 431. Senior Projects III (1) S A continuation of the solution to the engineering problem. Team building, design and research, packaging, documentation, and presentation skills. One one-hour meeting with each team per week. Prerequisite: EET 411. Corequisite: EET431L. 431L. Senior Projects HI Lab (2) S Laboratory class to support EET 431. Project completed, presentation to the faculty, and a written report. Two two-hour labs per week. Corequisite: EET 431. 62 Electronic Engineering Technology General Information 450. CAD Electronic Design (1) A, W, S Advanced computer aided drawing of schematics and circuit board layouts. Schematics, netlists, circuit board layout, and autorouting of circuits. Recommended to be taken concurrent with EET 431. One one-hour lecture per week. Prerequisites: EET 222, 231 and 232. Corequisite: EET450L. 450L. CAD Electronic Design Lab (3) A, W, S Laboratory class to support EET 450, CAD Electronic Design. Draw schematics and lay out circuit boards for system designs. Three two- hour labs per week. Corequisite; EET 450. 451. Communications II (3) A, S A continuation of EET 231. Voice, digital, image, space, laser, fiber optic, telephone, and microwave communications circuits. Three one-hour lectures per week. Prerequisites: EET 231, 232. 451L. Communications II Lab (1) A, S Laboratory class to support EET 451. Design, model, and test communications circuits and systems. One two-hour lab per week. Corequisite: EET 451. 452. Computer Design II (3) A, S Advanced computer design. Analog signal encoding, and decoding instrumentation and control interfacing. Design of software and hardware circuit modules to automate electro-mechanical processes. Three one-hour lectures per week. Prerequisites: EET 231 and 232. Corequisite: EET452L. 452L. Computer Design II Lab (1) A,S Laboratory class to support EET 452. Design, construct, and troubleshoot a computer system. One two-hour lab per week. Corequisite: EET 452. 453. Automatic Testing (3) A, S An introduction to automatic test circuits and system. Specify test needs and design hardware and software to automate the process. Three one-hour lectures per week. Prerequisites: EET 231, 232, and Math 212. Corequisite: EET453L. 453L. Automatic Testing Lab (1) A, S Laboratory class to support EET 453. Design, model, operate, and test automatic testing circuits and systems. One two-hour lab per week. Corequisite: EET 453. 454. Digital Signal Processing (3) A, S A continuation of EET 331, with emphasis on advanced digital signal processing techniques. System identification, deconvolution, image processing, speech synthesis, industrial applications and dedicated DSP hardware. Three one-hour lectures per week. Prerequisite: EET 331. Corequisite: EET 454L. 454L. Digital Signal Processing Lab (1) A, S Laboratory class to support EET 454. Digital signal processing circuits designed, constructed, analyzed, and computer simulated. One two-hour lab per week. Corequisite: EET 454. 455. Electrical Power II (3) A, S A continuation of EET 131. System protection, stability, symmetrical components, per unit values, fault analysis, harmonic analysis, and load studies. Three one-hour lectures. Prerequisites: EET 131 and Math 212. Corequisite: EET455L. 455L. Electrical Power II Lab (1) A, S Laboratory class to support EET 455. Modeling and computer aided analysis of power systems. One two-hour lab per week. Corequisite: EET 455. 456. Industrial Controls (2) A, S An introduction to ladder diagrams, electrical symbols, and programmable logic controllers. Two one-hour lectures. Prerequisite: EET 131 and math 212. Corequisite: EET456L. 456L. Industrial Controls Lab (2) A, S Laboratory class to support EET 456. Program and run programmable logic controllers. Two two-hour labs per week. Corequisite: EET 456. 457. Instrumentation (3) A, S An introduction to devices for instrumentation of industrial control | systems. Temperature, pressure, position, distance, current, voltage, light, and sound sensors. Three one-hour lectures per week. Prerequisites: EET 231 and 232. Corequisite: EET457L. Student Services Interdisc. Programs Applied Science & Technology 457L. Instrumentation Lab (1) A, S Laboratory class to support EET 457. Design, construct, and test instrumentation devices. One two-hour lab per week. Corequisite: Arts & EET 457. Humanities 458. Integrated Circuits (3) A, S An introduction to integrated circuit design and manufacturing. Semiconductor theory, P-N junction and field effect transistor design, and manufacturing processes. Three one-hour lectures per week. Prequisites: EET 231, 232 and Math 212. Corequisite: EET 458L. Business & Economics 458L. Integrated Circuits Lab (1) A, S Laboratory class to support EET 458. Design and model integrated circuit devices. One two-hour lab per week. Corequisite: EET 458. Education 459. Microwave Systems (3) A, S An introduction to microwave theory, circuits, and systems. Microwave transmitters and receivers, propagation characteristics, and design of systems. Three one-hour lectures per week. Prerequisites: EET 231, 232 and Math 212. Corequisite: EET 459L. Health Professions 459L. Microwave Systems Lab (1) A, S Laboratory class to support EET 459. Design, model, and test microwave circuits. One two-hour lab per week. Corequisite: EET 459. 460. Satellite Systems (3) A, S An introduction to satellite systems, circuits, and systems. Satellite orbits, propagation, frequency spectrum, power sources, transmitters, receivers, ground stations, antennas, testing, and operation. Three one-hour lectures per week. Prerequisites: EET 231, 232 and Math 212. Corequisite: EET460L. 460L. Satellite Systems Lab (1) A, S Laboratory class to support EET 460. Design, model, operate and test satellite circuits and systems. One two-hour lab per week. Corequisite: EET 460. Science Social & Behavioral Sciences 63 Continuing Education